Snowman Lantern Router Templates Cast Acrylic Christmas Snowman Face templates Make Lanterns without CNC or Laser Christmas Lantern Router

Snowman Lantern Router Templates made from Cast Acrylic | For Christmas Snowman Face templates | To Make Lanterns without CNC or Laser Christmas Lantern Router Templates

Make and/or sell your own Holiday Snowman Lanterns without using a CNC or Laser cutter. With our Snowman router templates, you can make lanterns without the use of these expensive machines.

We have 8 Christmas Snowman Faces to choose from. Feeling creative mix and match different faces, eyes from one, nose from another, the possibilities are endless. Save big and get them all.

Our templates are made from high quality cast acrylic material, ~1/4" thick**. They are laser cut to precise measurement. Each Router Template is cut to exact measurements for standard 5.5” cedar fence pickets. They are ~8” tall and ~5.5” wide, faces are ~4.5” at widest point, this makes centering the template on the cedar fence picket quick and easy.

We suggest using a 1/8 template or flush trim bit and double-sided tape for best results, the smaller the bit the more detail you will achieve. 1/4” bit will work for most cuts but some tight areas may require 1/8” bit for best detail. For best results we use a routing table and flush trim bits either 1/4" or 1/8" pending detail required. Guide bushings will work for some templates but are too large or tight on others unless they are small sized.

** These are made from 1/4" (6mm) cast acrylic, this is a general term, actual thickness is slightly thinner, this is standard across all 1/4" acrylic here or anywhere else, similar to a 2 x 4 only being 1.5 by 3.5 No real impact when using template / pattern / flush trim bits but we like to disclose it.